Model:	Golden-SD9
Target:	1-15T; 1-23T; 1-31T
Operating Type:	Stand-alone; FPGA based operation
Major Features: (Details as below)	1) Read-Only Source Port 2) Modular socket design 3) Full “secure” erase 4) Write protection 5) Double source comparation 6) Real time pc monitor 7) Event log management
Max SD/MicroSD Supported:	2TB
File System Supported:	HFS+, HFSX, FAT, exFAT, NTFS, ext2/3/4
Compatibility:	SD, SDHC, Micro SD, Micro SDHC card
Max. Write Speed:	33MB/Sec≈2GB/Min
Warranty:	1 Year

    Operation Type

    Stand-alone, FPGA-based operation (Non PC-based system design).

  

    Controller Design

    Embedded controller is designed to support capacities up to 2TB. Constant improvement supports latest market -available devices.

  

    Bandwidth Performance

    Speed transfers of up to 2.0GB/min. (33MB/sec.) Dedicated bandwidth enables high-volume replications without speed degradation.

 

    Read-Only Source Port

    There is no option to disable this built-in feature and it is integrated with all U-Reach duplicators.

  

    Modular Socket Design

    Modular-designed ports effectively reduce downtime and is cost-effective for long-term ownership.

 

    Real-Time PC Monitoring

    View live status for: writing/reading speed, total capacity, current function progress per port.

 

    Event Log Management

•   Records: operating durations, individual port copy progressions, connected device models, capacities, serial numbers, and PASS or FAIL results.

    Device writing/reading speeds are recorded.

•   Log report files are generated through Port #1 or through the U-Reach PC Link Software Utility.

  

    Full “Secure” Erase

    A purge command is sent to the device’s chip IC (must support it), which resets all flash memory as empty. This erasing algorithm conforms to SD Association Erasing Standards and NIST 800-88 guidelines.

 

    Write Protection 

    Perform hardware-level write protection to only selected devices that supports it.

 

    Double Source Comparison

    Instead of wearing out a source device, two source devices are utilized to reduce wear during mass productions.

 

    Get “Device” ID

    Retrieve all connected device information by its: port number, capacity sector, VID, PID, serial number, vendor, and CID. 

Caution

If the cards were originally protected, the system will automatically release protection, then copy + compare.

 

 

Note	⚫ It takes a few seconds to write protect a specific target. ⚫ This function is not executable on the source port.

 

 

¤ How to unlock write protect?

	Unlock write protected SD

 

 

Caution

⚫ Only SDs with “normal write-protect” mode can be released. ⚫ It takes a few seconds to write protect a specific target. ⚫ This function is executable on the source port.

Photos	Models	Target Ports	Product Dimensions	Package Dimensions	Package Weight
	SD908G	1:7	24 x 19.5 x 11.5 cm	35 x 35 x 29 cm	5.5 kg
	SD916G	1:15	24 x 18 x 14 cm	35 x 35 x 29 cm	6.5 kg
	SD924G	1:23	24 x 18 x 16.5 cm	35 x 35 x 29 cm	7 kg
	SD932G	1:31	21 x 31.5 x 18.5 cm	42 x 33 x 27 cm	8 kg
	SD940G	1:39	23 x 31.5 x 20.5 cm	42 x 33 x 27 cm	9.5 kg
	SD964G	1:63	30 x 31.5 x 27 cm	42 x 41 x 32 cm	13 kg