PD/QC/FCP/AFC Trigger Board Module PD/QC Decoy Board Fast Charge USB Type-c to 20v High Speed Charger Power Delivery Boost Module

Features:
1. This module supports multiple protocols: PD, QC, FCP, AFC protocols;

Parameter:
Supporting protocols: PD, QC, FCP, AFC protocols
Voltage range: Supports 5V/9V/12V/15/20V voltage
Current: 5A (The actual output current is determined jointly by your power supply and load, and the input and output of the deceiver are direct.)
Scam board size: 23.2 * 11.8 * 4.4mm
Instructions for use: According to the output capacity of the power supply voltage, the voltage can be automatically lowered to a certain level (the 20V deceiver can successfully deceive the power supply with the highest output of 12V to output 12V). This function is applicable to the PD protocol, while other protocols are determined by the power supply.
A 5A current can be passed through the circuit, and the actual output current is determined jointly by your power supply and load. The input and output of the deceiver are direct.

Product Description:
1. What voltage is required for the five gears of 5V/9V/12V/15/20V? Short circuit the corresponding pads together.
2. For example, if you set a lure of 20V, but your charger only has a maximum of 9V, it will automatically downshift to lure the output of 9V.
3. The maximum support is 5A, and the actual output current/power is determined by your fast charging charger and load.
Attention: The board needs to be short circuited to set the output voltage. When short circuiting, the temperature of the soldering iron should not be too high, just enough to hold tin. This way, short circuiting is easy, and the resistor cannot be removed.

Product List:

Set 1:
1X module

Set 2:
1X module
1X shell

Set Three:
1X module
1X shell
1 X-ray (welded and shipped)